Getting your Airbag Module Reset: How the Process Works
When an accident triggers your SRS control module, it locks down permanent crash data, keeping your warning light on. At Toki Auto Works, we clear that data and restore your system. Here is how our reset process works:
Image of Airbag light on dashboard
1. Initial Diagnostic Scan
We start by scanning your vehicle's safety network with advanced software to check fault codes and see if the module is storing hard-coded crash data.
2. On-Vehicle vs. Bench Resetting
Depending on your vehicle, your reset follows one of two paths:
On-Vehicle Reset: For many modern vehicles, we clear crash flags directly through the diagnostic port without removing the unit.
Bench Reset: For other models, we carefully remove the module and use specialized BDM frames and programming tools on the bench to wipe the internal memory.
Image of skilled Toki Auto Works technician soldering and reprogramming airbag module
3. When a Module Needs Replacement
Most modules can be reset successfully. In rare cases where our software is unable to unlock the module, a unit suffers severe physical, fire, or internal electronic damage, it cannot be safely reset and must be replaced.
4. Reinstallation and System Check
Once cleared and reprogrammed, we reinstall the module along with any required components like seatbelt tensioners, then perform a final system check to turn off the warning light.
Get Professional SRS Module Services
If you need an airbag module reset, Call Toki Auto Works to book an appointment, or stop by our shop in Sacramento to drop off your airbag module to be reset!